Some fist rules at the drawing up of your projector
The drawing up of a projector has become today terrible simple. Nevertheless there are some basis rules which one respects best, want one a beautiful picture obtain.
At an elaboration for a projection your configuration includes generally following components;
1. Source (PC./rag top for computer presentations, DVD/Video/satellite recipient, TV-tuner, camera, etc.… for video presentation)
2. Projector
3. Remote control with mouse control (if wished)
4. projection baffle
5. Extra loudspeakers (if wished)
To keep the risk on problems at the elaboration this way small possible, you respect the next order according to the rules of art at installation best;
1. Everything establish
2. Everything connect
3. Projector incites
4. After countdown sequence of projector (30sec.) also incite the picture source
Step 1: Essays of equipment
Your main point is the projection baffle or projection surface. After you have chosen the correct format (to see which baffle format is suitable most? ) you must stipulate where you place your baffle. Molar a place which is for everyone well visible. Care that the everyone can examine complete picture, also the lower part.
Look further also that on there falls this way little possible slightly direct on the baffle.
After you have established your baffle, you can establish your projector. Preferably you place your projector right for the baffle.
Of above it examined the ideal that is you the lens of your projector beautiful in the middle for screen places (pays attention to: at the most of project ears the lens does not stand in the middle of the projector!).
If the circumstances do not allow on the spot such an elaboration, can be project you obliged slantingly. Avoid this as much as possible. You cannot however differently, then offer the most of Sanyo-Projectors advantage of the horizontal keystone correction.
This is digital appliances that allows at a slanting projection your picture nevertheless beautiful project right to the baffle.
Since this is a digital correction, the acerbity of especially small character (excel, outlook, internet-browser,…) something less sharpens seem. This is a consequence of the compression. This can be avoided only at a straight elaboration.
Of aside it is examined altitude on which the most of project ears are best placed right to the lower part of the projective picture. If you do not have a projection table which is in altitude adjustable, it can be that you the projector must roll over something using the adjustable feet up front. Then trapezium-form can get the picture (at the top broader than below). Also this can remedied become using the vertical digital keystone correction, where all Sanyo projectors have equipped. The projective picture is then put right digitally. At most recent Sanyo- the models in ultra-portable segment do the projector this automatically for you as soon as you roll over him.
Here too the same rules apply as at a table elaboration
the lens preferably beautiful centrally for the baffle. Altitude is best right with the Top of the projection baffle. More information concerning ceiling assembly finds you in the chapter options for ceiling assembly.
After you your baffle and projector has established, you must still the laptop/PC, and put ready if desired also your extra loudspeakers.
The Laptop/PC stand generally in the neighborhood of the participant. Many prefer the picture of the computer himself also for itself being able see. You can the presentation head thus direct From your computer.
Care further that the distance between computer and projector is this way possible. How shorter your cables of computer to projector, how better the picture and how simple the installation!
At giving presentations where supportive sound is important, is the sound volume of own computer-speakers generally inadequate. You can opt then for the use of extra multimedia multimedia-speakers. Best these speakers ahead left and place Right of the baffle to publicly it has been aimed.
Step 2: Connect of equipment
Provide all apparatus with flow (220-240V). The flow for the projector pays attention be interrupted cannot during the presentation (badly for the lamp!) to that.
Then is of it a distinction in the manner connect between a computer presentation, and a video projection.
A. COMPUTER
Beside the flow cables for all concerning apparatus there are possibly still necessary VGA-cable for indicator transfer, the Mouse cable (optional) and the cables for the speakers.
VGA-cable:
At presentations From given a rag top is the installation simple. YOU link then the rag top with VGA-cable (to see image) to the projector. VGA cable are a cable with on both sides male VGA-plug (DB15). This is a sheet with 15-pins. This cable looks after RGB transmission of the computer indicator to your projector.
Sometimes it can be that has not been established your reflect rag top both on its own baffle and by means of
VGA port to the projector the picture. This does not result then generally in a picture on your rag top baffle, but on the projection baffle.
This can solve you at the most of laptops by pressing on Fn+F5, if necessary several times behind each other.
you see then immediately that this way Screen Settings can adapt you to wish; only picture on rag top, picture on rag top and baffle, only picture on baffle, etc.…
Traditional desktop-computer (PC. with detached monitor) with VGA-cable are connected directly on the projector. This does you after you have disconnected your picture monitor. Look that you in VGA-input of the projector put the computer cable (not in the termination!).
By means of VGA-output on the projector can connect you then your computer-monitor again.
You a projector which has no termination (no problem at Sanyo which has virtually all a termination) has, thanks can solve you this using VGA-splitter. This is a case where you connect your computer on. And of from that you go then further with two different cables: one for the projector, and one for the monitor.
Mouse Cable:
The most of project ears are provide with a remote control with among others a mouse control function. These allow use the Mouse Function on remote control. It is however necessary in this case your connect Mouse cable. Today this standard USB mouse cable are that are provided. YOU link the projector with this cable with USB port of your computer.
Then your presentation can you head From equally which location in the presentation space; you are no longer shackled to your computer! A click on remote control is enough further to go in your show.
audio cables;
If you give a multimedia presentation where sounded an important role has, then you can do this with extra set multimedia multimedia-speakers. Ideal is for this active use speakers; these are speakers with a built in volume knob (generally below on one of both loudspeaker boxes). The cables can be dovetailed the most of project ears using mini jacket stereo plugs.
YOU can do this direct From the rag top, but then you cannot serve the volume with the remote control of the projector. For this reason more skilfully the computer with a sound cable is connect on the projector (generally a mini jacket cable). Then you can connect the speakers on the audio termination of the projector. The volume of the presentation can be regulated then with the volume bud on remote control! Sanyo distinguish themselves with this function, thanks to data that the audio termination is regulable with the volume bud.
The projector itself also has a loudspeaker. But at the compact project ears it concerns here records speaker that similar is retrieve be with the speakers which also on laptops. These are enough for a restricted meeting, but generally are extra speakers nevertheless desirable because of the volume and of the positioning in the presentation space.
If you connect your projector for the projection of a video picture, then the difference concerns versus a computer presentation the source of the picture, and the corresponding manner of to connect (to see also further at connections).
You have for a video indicator generally the choice from a composite cable (RCA connector/cinch, generally yellow of color), S-Video a cable (also Y/C called, generally small around din-4 plug with 4 pins and a cube) or a lake sophisticated connection such as RGB, component or HDMI.
At multimedia presentations business it can be just like at the connection of a computer connect the sound by means of the projector. One links then with an audio cable (RCA/cinch or mini jacket) the source (video tape recorder, camera, DVD player,…) with the projector, and shuts of projector by means of the audio termination to the active speakers. The amplifier of the projector is then used to regulate the volume using the remote control of the projector.
3. Projector incites.
After all your equipment has been established and has been connected, you can incite the projector by means of the power knob. Once this button pressed, the lamp will burn and you hear the ventilation or the machine function also. It is important take care that the flow is not interrupted. At turning off projector continues keep turning the ventilation, as it happens, still kitten(1 à 2 minutes) to cool the lamp good. If the lamp does not get these after cooling the chance on damage is real. Relate Post
0 comments:
Post a Comment